

What's in the box – RAM-B-177-C-TAB2U
RAM Mounts Tab-Tite with Glare Shield Clamp for 7" Tablets (RAM-B-177-C-TAB2U) holds a small tablet by its edges with spring-loaded cups, so ports, audio jacks and buttons stay reachable. The cups can be changed, and the back plate takes different-sized support cups if you later move to another tablet. A 135 mm (5.31") arm gives the reach to bring the screen off the glare shield towards the pilot.
Tablet larger than the Tab-Tite range? The X-Grip glare shield mount for 7–8" tablets or the 9–11" version may fit. The holder alone is RAM-HOL-TAB2U.
Key Features
- Edge grip with spring-loaded cups – holds 7" tablets 177.8–244.5 mm (7"–9.625") tall and 101.6–134.9 mm (4"–5.31") wide
- Ports stay usable – interchangeable cup ends leave USB, power and audio connections free
- Ready for your next tablet – the back plate accepts other sizes of support cups, so only new cups are needed
- Slim devices – depth 3.3–14.2 mm (0.13"–0.56")
- Long reach – 135 mm (5.31") arm on a glare shield clamp for edges up to 15.9 mm
In the cockpit
The clamp closes on glare shield or panel edges up to 15.9 mm (5/8") thick without tools. Use the long arm to place the tablet where it is readable but does not block the view or the controls. Follow your aircraft's and aviation authority's rules on mounting portable devices.
Compatibility
- 7" tablets 177.8–244.5 mm tall, 101.6–134.9 mm wide and 3.3–14.2 mm deep
- Aircraft glare shields and flat edges up to 15.9 mm (5/8") thick
- Car side window edge lips
Technical Specifications
| Part Number | RAM-B-177-C-TAB2U |
|---|---|
| Kit Contents | RAM-HOL-TAB2U Tab-Tite holder, glare shield clamp ball base, long double socket arm, round plate |
| Device Size | Height 177.8–244.5 mm (7"–9.625"); width 101.6–134.9 mm (4"–5.31"); depth 3.3–14.2 mm (0.13"–0.56") |
| Ball Size | B, 25.4 mm (1") |
| Arm | Long, 135 mm (5.31") socket to socket |
| Base | Glare shield clamp for edges up to 15.9 mm (5/8") thick, two composite thumb screws |
| Clamp Range | Up to 15.9 mm (5/8") |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | Marine-grade aluminium, high-strength composite |
| Mounting Type | Flat edge clamp |
| Weight | 0.64 kg (1.40 lb) |
| In the Box | Tab-Tite holder, glare shield clamp ball base, long double socket arm, round plate, assembly hardware, thumb screws, rubber caps, rubber adhesive pad |
Issuing 7" tablets to students or pilots across a training fleet? As an Official RAM Mounts Reseller we supply the same Tab-Tite glare shield mount for every aircraft.
Questions about RAM-B-177-C-TAB2U
Will my 7" tablet fit?
Measure it: it must be 177.8–244.5 mm tall, 101.6–134.9 mm wide and 3.3–14.2 mm deep. Thick rugged cases will usually exceed the depth range.
Can I reuse the holder with a different tablet later?
Yes. The back plate takes other sizes of support cups, so changing tablets usually means buying new cups rather than a new holder.
Why the long arm?
The 135 mm arm lets the tablet sit back from the glare shield, closer to the pilot, instead of right at the windscreen.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

