

RAM Mounts No-Drill Vehicle Base for Ford E-Series Van (RAM-VB-119) is the floor base behind five of RAM's Econoline mounting kits. It installs under the passenger seat rail bolts, spaced 343 mm (13.5") apart, with one seat base leg and a small set of 1/4" bolts, washers and nuts in the box. Cutaway chassis whose seat belts are anchored to the floorboard are the exception – RAM says the base will not fit them.
📦 What's in the box – RAM-VB-119
- No-Drill vehicle base – powder-coated steel, for the passenger seat rail bolts
- Seat base leg – 1
- Hex bolts – 2× 1/4"-20 × 3/4"
- Washers – 2× 1/4" flat washers, 2× 1/4" lock washers
- Nyloc nuts – 2× 1/4"-20
💡 Want a finished stand? This base is used in RAM-VB-119-SW3 (Tough-Tray III), RAM-VB-119-SW1 (original Tough-Tray), RAM-VB-119-R1-SNMU (Secure-N-Motion), RAM-VB-119-DAT1 (key-locking pole and arm) and RAM-VB-119-INC1 (AMPS plate, no tray).
Key Features
- Common base for five kits – the same base sits under RAM's E-Series laptop, locking and AMPS-plate mounts
- Passenger seat bolts, 343 mm apart – the seat rail bolts hold it – the van floor is not drilled
- Seat base leg in the box – one leg plus 1/4"-20 hex bolts, flat and lock washers and nyloc nuts
- Powder-coated steel – a 5.17 kg (11.4 lb) steel base for daily fleet use
Compatibility
- Ford E-Series (Econoline) Van 2000–2027, including E-150, E-350 and E-450 vans
- Passenger seat with rail bolts 343 mm (13.5") apart
- Not for cutaways with seat belts mounted to the floorboard
Technical Specifications
| Part Number | RAM-VB-119 |
|---|---|
| Vehicles | Ford E-Series (Econoline) Van 2000–2027, including E-150, E-350 and E-450 vans; not cutaways with floor-mounted seat belts |
| Hole Pattern | Seat bolts 343 mm (13.5") centre to centre |
| Materials | Powder-coated steel |
| Mounting Type | Floor mount on the passenger seat rail bolts, no drilling |
| Weight | 5.17 kg (11.40 lb) |
| In the Box | Vehicle base, 1 seat base leg, 2× 1/4"-20 × 3/4" hex bolts, 2× 1/4" flat washers, 2× 1/4" lock washers, 2× 1/4"-20 nyloc nuts |
Fitting out a fleet of E-Series work vans? As an Official RAM Mounts Reseller we supply the base on its own or any of the complete kits built on it, matched to each van.
Complete RAM mounts with this part (5)
Every complete mount below includes this part.
No-Drill Locking Floor Mount for Ford E-Series Van, C-Size
359,00 € +VATOut of stock
No-Drill Vehicle Mount with AMPS Round Plate for Ford E-Series Van, C-Size
336,49 € +VATOut of stock
No-Drill Locking Laptop Mount with Secure-N-Motion for Ford E-Series Van, C-Size
542,42 € +VATOut of stock
No-Drill Laptop Mount with Tough-Tray for Ford E-Series & Econoline Van, C-Size
440,52 € +VATOut of stock
No-Drill Laptop Mount with Tough-Tray III for Ford E-Series Van, C-Size
495,97 € +VATOut of stock
Questions about RAM-VB-119
Does RAM-VB-119 fit E-Series cutaways?
Not cutaways whose seat belts are mounted to the floorboard – RAM states the base will not fit those.
What hardware comes with the base?
One seat base leg, two 1/4"-20 × 3/4" hex bolts, two flat washers, two lock washers and two 1/4"-20 nyloc nuts.
Which vans are covered?
RAM lists the Ford E-Series Van from 2000 to 2027, which includes E-150, E-350 and E-450 vans.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.