

RAM Mounts Low-Profile Cage Guard Mount (RAP-403BPU) fixes a tablet dock or device holder flat against a forklift's cage guard, with no ball or arm in between. Two powder-coated steel backing plates clamp to the guard, a composite riser sits under the dock, and the 4-hole AMPS pattern takes tablet docks of almost any size. The dock ends up close to the guard and cannot swing.
A spare flush-mount spacer plate – the riser used in this kit – is useful if you mount docks to flat panels elsewhere on the truck.
Key Features
- Fixes to the cage guard – two backing plates and the assembly hardware hold the mount on the guard itself
- Flush, low profile – the dock bolts directly to the plate – 127 mm wide and 79.4 mm high (5" × 3.125")
- 4-hole AMPS – 30 × 38 mm (1.181" × 1.496") pattern for tablet docks and holders
- Steel where it counts – powder-coated heavy-duty steel plates with a composite riser, 0.27 kg in total
On the forklift
Because the dock is bolted straight to the guard, there is no ball joint to work loose or re-tighten as the truck runs over dock plates and uneven floors. Check that the dock or holder you plan to use has the 4-hole AMPS pattern before ordering.
Compatibility
- Forklift cage guards
- Tablet docks and device holders with the 4-hole AMPS pattern (30 × 38 mm)
- Not for holders or docks with the 2-hole AMPS pattern, including GDS Uni-Conn
Technical Specifications
| Part Number | RAP-403BPU |
|---|---|
| Kit Contents | 2 steel backing plates, RAP-403FU spacer plate (riser), assembly hardware |
| Hole Pattern | AMPS 4-hole 30 × 38 mm (1.181" × 1.496") |
| Dimensions | Width 127 mm (5"); height 79.4 mm (3.125") |
| Materials | Powder-coated steel, high-strength composite |
| Mounting Type | Bolted to the cage guard |
| Weight | 0.27 kg (0.59 lb) |
| In the Box | Two backing plates, one riser, assembly hardware |
Rolling out tablets across a warehouse forklift fleet? As an Official RAM Mounts Reseller we match cage guard mounts to your docks and quote for every truck in one go.
Questions about RAP-403BPU
Will a GDS Uni-Conn dock fit?
No. The mount only lines up with the 4-hole AMPS pattern; holders and docks with the 2-hole AMPS pattern, GDS Uni-Conn included, do not align.
What is in the kit?
Two steel backing plates, one riser (the RAP-403FU spacer plate) and the assembly hardware.
Can I angle the tablet?
Not with this mount alone – it holds the dock flat for the lowest possible profile. If the screen needs tilting, a ball-and-arm mount is the better choice.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.