

What's in the box – RAM-B-177U
RAM Mounts Glare Shield Clamp Mount with Diamond Plate (RAM-B-177U) grips the lip of a panel instead of screwing into it. Two composite thumb screws squeeze the base onto an edge up to 15.9 mm (5/8") thick – an aircraft glare shield or the edge lip of a car side window are the typical spots. A short arm and a 2-hole AMPS diamond plate complete it, ready for most RAM cradles.
For a phone or small tablet, swap the diamond plate for an X-Grip phone holder or X-Grip 7–8" tablet holder with its own B-size ball. Need the device further from the clamp? Use a medium B-size arm.
Key Features
- No holes in the panel – two 1/4"-20 composite thumb screws clamp the base onto an edge up to 15.9 mm (0.625") thick
- Surface protection – a 49 × 77.7 mm (1.93" × 3.06") rubber adhesive pad and two rubber caps come with the clamp
- Low, compact position – the short arm measures 44.5 mm (1.75") socket to socket
- Ready for RAM cradles – the diamond plate carries the 2-hole AMPS pattern, 48.6 mm (1.912") hole spacing
- B-size ball and socket – rubber balls at both ends of the arm allow fine angle changes and absorb vibration
On the glare shield
Pilots use this clamp to put a GPS or tablet cradle on the glare shield without drilling the panel; the rubber adhesive pad in the box protects the surface under the jaws. The short 44.5 mm arm keeps the device low so it blocks as little of the view as possible. Check your aircraft's and aviation authority's rules before you fit equipment in the cockpit.
Compatibility
- Aircraft glare shields, car side window edge lips and other flat edges up to 15.9 mm (5/8") thick
- RAM and third-party cradles with the 2-hole AMPS pattern (48.6 mm)
- All RAM B-size (25.4 mm / 1") holders, arms and balls
Technical Specifications
| Part Number | RAM-B-177U |
|---|---|
| Kit Contents | RAM-B-259U glare shield clamp ball base, RAM-B-201U-A short arm, RAM-B-238U diamond base |
| Ball Size | B, 25.4 mm (1") |
| Arm | Short, 44.5 mm (1.75") socket to socket |
| Clamp Range | Up to 15.9 mm (0.625") |
| Hole Pattern | 2-hole AMPS, 48.6 mm (1.912") |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | Marine-grade aluminium |
| Mounting Type | Flat edge clamp |
| Weight | 0.27 kg (0.6 lb) |
| In the Box | Clamp base, short arm, diamond plate, 2 thumb screws, 2 rubber caps, rubber adhesive pad |
Kitting out a flying club's aircraft or a set of rental cars with the same GPS mount? We are an Official RAM Mounts Reseller and can supply matching clamps and cradles in quantity.
Complete RAM mounts with this part (3)
Every complete mount below includes this part.
Questions about RAM-B-177U
How thick can the edge be?
Up to 15.9 mm (5/8"). The two thumb screws close the clamp onto the lip, so thinner panels are fine as well.
Will it mark the glare shield?
A rubber adhesive pad is included to go between the clamp and the surface, and the thumb screws have rubber caps.
What fits on the diamond plate?
Any cradle with the 2-hole AMPS pattern (holes 48.6 mm apart). RAM also sells this clamp ready-made with a Garmin cradle (RAM-B-177-GA7U) or a Finger-Grip holder (RAM-B-177-UN4).
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.





