

What's in the box – RAP-B-121-UN4U
The RAM Finger-Grip Universal Holder with Composite Yoke Clamp Base (RAP-B-121-UN4U) handles an unusually wide range of devices – handheld radios, Garmin outdoor GPS units, Zebra and Honeywell handheld computers, even Brother mobile printers. Three sets of rubber-coated fingers are squeezed open and closed on the device's sides. The composite clamp works on rails and, with the included adapter, on flat edges.
For a radio that has a belt clip, the belt clip holder kit is an alternative. To change the reach, fit the short composite arm or the long B-size arm.
Key Features
- Holds very different devices – width 31.8–88.9 mm (1.25"–3.5"), depth up to 38.1 mm (1.5"), height up to 184.2 mm (7.25") with optional supports
- Squeeze-to-open fingers – three sets of four flexible, rubber-coated fingers open when you squeeze their ends
- Back plate support – a plate at the bottom of the holder supports the device from behind
- Rail or edge clamp – fits round rails or edge lips 15.9–31.8 mm (0.625"–1.25"); flat clamp hardware adapter included
- Second ball option – the clamp base can take an extra ball for a double-ball base (not included)
Radio or GPS on the yoke
Set the fingers once for your handheld radio or GPS, and the device wedges into the holder on the control yoke at every flight. The light composite clamp is tightened by hand. Follow your aircraft's and aviation authority's rules for equipment mounted on the controls.
Compatibility
- Zebra TC21, TC26, iMZ320; Honeywell CN75, CN75e, Dolphin 6000, 7800, 9700; Unitech PA730; Fujitsu FTP-628; Brother RuggedJet Go 2035B, 2055WB
- Garmin Astro 900, Delta XC series, eTrex Touch 25/35/35t, inReach Explorer, inReach SE, Montana 700/750 series, Sport PRO
- Handheld radios listed by RAM from Baofeng, Midland, TYT, Wouxun and Yaesu, plus Amcrest ATR-22 and Venterior VT-FF series
- Round rails, yokes and flat edge lips 15.9–31.8 mm (0.625"–1.25")
Technical Specifications
| Part Number | RAP-B-121-UN4U |
|---|---|
| Kit Contents | RAM-HOL-UN4U Finger-Grip holder, RAP-B-121-238U composite yoke clamp mount with diamond plate |
| Device Size | Width 31.8–88.9 mm (1.25"–3.5"); depth up to 38.1 mm (1.5"); height up to 184.2 mm (7.25") with optional supports |
| Clamp Range | 15.9–31.8 mm (0.625"–1.25") rail diameter or edge lip |
| Ball Size | B, 25.4 mm (1") |
| Arm | Medium, 76 mm (3") socket to socket |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | High-strength composite |
| Mounting Type | Rail clamp / flat edge clamp |
| Weight | 0.44 kg (0.96 lb) |
| In the Box | Finger-Grip holder with 3 sets of fingers, composite clamp base, medium arm, diamond plate, flat clamp hardware adapter, assembly hardware |
Aircraft, service vehicles or boats with a mix of scanners, radios and GPS units? As an Official RAM Mounts Reseller we can standardise on one universal holder and quote for the whole fleet.
Questions about RAP-B-121-UN4U
Does RAP-B-121-UN4U hold a Zebra TC21 or TC26?
Yes, both are on RAM's list for this holder, as are the Honeywell CN75 and Dolphin models.
Composite or aluminium?
This kit uses a composite clamp, arm and plate and includes a flat clamp adapter. RAM-B-121-UN4U has the same Finger-Grip on an aluminium yoke mount.
Can I mount a Brother mobile printer?
RAM lists the Brother RuggedJet Go 2035B and 2055WB. Other printers must fit 31.8–88.9 mm wide and 38.1 mm deep.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

