Setup

Zebra ZD421 setup guide: from unboxing to first label

Load labels and ribbon, calibrate with SmartCal and connect the ZD421 to your PC in the right order, for the ZD421t, ZD421c and ZD421d.

20 min Difficulty: Easy Updated: By SCANSHOP team
In this guide

    This guide takes a new Zebra ZD421 from the box to a calibrated first label. It covers all three versions: the ZD421t with a ribbon roll, the ZD421c with a ribbon cartridge and the ZD421d for direct thermal labels without ribbon. Do the steps in this order and Windows will find the right driver the first time.

    You'll need
    • Labels on a 12.7 mm or 25.4 mm core, up to 127 mm roll diameter. Width from 15 mm up to 108 mm (ZD421d), 112 mm (ZD421t) or 118 mm (ZD421c)
    • ZD421t: a Zebra ribbon roll of 74 m or 300 m. ZD421c: a genuine Zebra ribbon cartridge
    • A Windows 10 or 11 PC with administrator rights
    • The USB cable from the box, or an Ethernet cable for a network connection

    Before you start

    Check the box

    The box holds the printer, the power supply with its power cord, a USB cable and the printed Quick Start and regulatory guides. Thermal transfer roll models also come with empty ribbon take-up cores (25.4 mm and 12.7 mm) and two adapters for 300 m ribbons from other brands. Labels and ribbon are not included. Check the printer for transport damage and keep the packaging until you know everything works.

    Choose a good spot

    • A firm, level surface close to a power socket.
    • A room between 4.4 and 41 °C with 10–90 % relative humidity, non-condensing.
    • Out of direct sunlight. A printer that gets too hot pauses until the printhead cools down.

    Know your version

    Version Prints with Skip
    ZD421t Ribbon roll, 74 m or 300 m The cartridge section
    ZD421c Ribbon cartridge, 74 m The ribbon roll section
    ZD421d Direct thermal labels, no ribbon The whole ribbon step

    Load the labels

    Connect the power supply to the printer and to a socket, but leave the printer switched off for now.

    1. Slide the two release latches towards the front and lift the cover.
    2. Pull the roll holders apart and place the label roll between them. Check that the roll turns freely and does not rest on the bottom of the media compartment.
    3. Pull the end of the labels out past the front edge of the printer.
    4. Push the labels under both media guides.
    5. Flip the labels up to see the movable media sensor underneath. For standard labels with gaps, and for continuous receipt paper, leave the sensor in its default position.
    6. Close the cover and press down on both front corners until the latches click into place.

    Labels with a black mark on the back, or with notches or holes, need the sensor moved over the mark. Our ZD421 calibration guide shows how.

    ZD411/ZD421/ZD611/ZD621 Changing Media

    Video: Zebra Technologies

    Load the ribbon

    Skip this step on a ZD421d. Direct thermal labels darken with heat, so they need no ribbon. Never print in direct thermal mode with a ribbon loaded.

    ZD421t: ribbon roll

    Before you start, remove the wrapping and free the adhesive strip at the start of the ribbon. Check that the ribbon core and the empty take-up core both have notches on the left side.

    1. Open the cover. Push the right end of an empty core onto the spring-loaded right take-up spindle, line it up with the left hub and turn it until the notches lock. Use the empty core from the box for the first roll.
    2. Fit the new ribbon roll on the lower ribbon supply spindle in the same way: right end first, then lock the left end into the notches.
    3. Stick the start of the ribbon to the take-up core with its adhesive strip, or with a thin strip of tape. Keep it straight.
    4. Turn the take-up hub with the top moving towards the back until the leader is covered by ribbon and the slack is gone.
    5. Check that the labels are loaded and close the cover.
    6. After you switch on, press FEED to advance at least 20 cm of labels. This straightens the ribbon and removes wrinkles.
    Tip

    Keep the empty core when a ribbon runs out. It becomes the take-up core for the next roll. The ZD421t takes genuine Zebra ribbons of 74 m and 300 m. Use the included adapters only for 300 m ribbons from other brands.

    Zebra's video shows a ZD411t; the ZD421t loads its ribbon the same way.

    ZD411T/ZD421T/ZD611T/ZD621T Changing Ribbon

    Video: Zebra Technologies

    ZD421c: ribbon cartridge

    The ZD421c works only with genuine Zebra ribbon cartridges. Open the printer and slide the cartridge, smart-chip end first, into the cartridge slot. Push until it is almost flush and you feel it lock, then close the cover. The printer reads the ribbon details from the chip.

    Switch on and calibrate

    Calibration teaches the printer the length of your labels and how to find the start of each one.

    1. Press POWER, the separate button at the left of the control panel.
    2. Wait until the STATUS light is steady green.
    3. Press and hold PAUSE + CANCEL for 2 seconds, then let go.
    4. The printer feeds a few labels while it measures them. When STATUS is steady green again, it is ready.

    This automatic calibration is called SmartCal. You don't need to repeat it for a new roll of the same labels; press FEED once or twice instead. If labels still skip or the printer stops with a red light, follow the manual calibration in our calibration guide or look up the light pattern in ZD421 lights and errors.

    Print a configuration report

    With the printer ready (steady green STATUS), hold FEED + CANCEL for 2 seconds. The printer prints its configuration report, plus a network report if it has Ethernet or wireless. Check three things:

    • The model and print resolution (203 or 300 dpi) at the top. You need both for the driver.
    • PRINT METHOD: on a ZD421t or ZD421c it must read THERMAL-TRANS before you print with ribbon. If it doesn't, set thermal transfer in the driver (next step) and print the report again.
    • On the network report: the IP address, once the printer is on your network.

    Install the driver, then connect

    Install the Windows driver before you connect the USB cable. If Windows finds the printer first, it lists it as an "Unspecified device" and the printer won't print properly. Download Windows Printer Driver v10 from the Zebra ZD421 support page, run it with administrator rights and choose the ZD421 at the resolution shown on your configuration report. Every screen, and the fix for "Unspecified device", is in Install the ZDesigner driver on Windows 11.

    In the driver's printing preferences, set the print method to match your printer: thermal transfer on a ZD421t or ZD421c, direct thermal on a ZD421d. The driver and your label software can override the printer's own setting.

    USB

    When the installer asks for it, connect the USB cable to the printer and the PC. Windows then completes the installation.

    Ethernet

    Models with built-in Ethernet, such as our ZD421t USB/Ethernet version, have a network socket at the back. Connect the cable to your network. The NETWORK light turns green for a 10/100 connection or amber for a 10Base connection. Print the configuration report again to read the IP address, then choose the network port in the driver installer. On other models, Ethernet is available as a module you can fit later.

    Wi-Fi and Bluetooth

    Wireless is optional on the ZD421. A dual-radio module adds Wi-Fi and Bluetooth Classic and can be factory fitted or added later through a door under the printer. Switch the printer off and unplug all cables before you fit it, and update the printer firmware afterwards. You can configure the connection with Zebra Setup Utilities on Windows, or with Zebra's printer setup app on a phone over Bluetooth Low Energy.

    Important

    ZD421 printers bought in Europe from 1 August 2025 can ship with extra security for the EU Radio Equipment Directive. Zebra's FAQ says this applies to models with Wi-Fi, or with Bluetooth plus Ethernet, and not to USB-only or USB/Ethernet-only models. A leaflet in the box with a link to the new setup instructions is the only way to tell. If your printer has it, set a Protected Mode password during setup; certain settings can only be changed with it. Zebra explains the steps in its PrintSecure Printer Administration Guide.

    Frequently asked questions

    Does the Zebra ZD421 come with labels or ribbon?

    No. The box holds the printer, power supply, USB cable and guides. Thermal transfer roll models also include empty take-up cores and ribbon adapters, but no ribbon.

    Can I use 300 m ribbon in the ZD421t?

    Yes. The ZD421t takes ribbon rolls of 74 m and 300 m. Ribbons from other brands of 300 m need the adapters from the box.

    Does the ZD421d need a ribbon?

    No. The ZD421d prints only on direct thermal labels, which darken with heat. Don't load a ribbon.

    How do I find out if my ZD421 is 203 or 300 dpi?

    Print a configuration report by holding FEED and CANCEL for 2 seconds. The resolution is printed at the top.

    What if I connected the USB cable before installing the driver?

    Windows shows an "Unspecified device". Install the ZDesigner driver and update the device's driver as described in our driver guide.

    Was this guide helpful?

    Used in this guide

    Compatible consumables and accessories for the Zebra ZD421.

    Compatible ribbons

    ProductWidth Length Type Ink sideCorePrice
    Zebra 2300 Wax Ribbon 110 mm × 74 m, Out, Black (02300GS11007) Zebra 2300 Wax Ribbon 110 mm × 74 m02300GS11007110 mm 74 m Wax Outside12.7 mm2,76 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 74 m, Out, Black (03200GS11007) Zebra 3200 Wax/Resin Ribbon 110 mm × 74 m03200GS11007110 mm 74 m Wax/Resin Outside12.7 mm5,33 €+VATIn stock
    Zebra 5095 Resin Ribbon 64 mm × 74 m, Out, Black (05095GS06407) Zebra 5095 Resin Ribbon 64 mm × 74 m05095GS0640764 mm 74 m Resin Outside12.7 mm5,10 €+VATIn stock
    Zebra 2300 Wax Ribbon 64 mm × 74 m, Out, Black (02300GS06407) Zebra 2300 Wax Ribbon 64 mm × 74 m02300GS0640764 mm 74 m Wax Outside12.7 mm1,61 €+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 74 m, Out, Black (05095GS11007) Zebra 5095 Resin Ribbon 110 mm × 74 m05095GS11007110 mm 74 m Resin Outside12.7 mm8,75 €+VATIn stock
    Zebra 2300 Wax Ribbon 84 mm × 74 m, Out, Black (02300GS08407) Zebra 2300 Wax Ribbon 84 mm × 74 m02300GS0840784 mm 74 m Wax Outside12.7 mm2,03 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m, Out, Black (800132-102) Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m800132-10256.9 mm 74 m Wax/Resin Outside12.7 mm3,07 €+VATIn stock
    Zebra 2300 Wax Ribbon 56.9 mm × 74 m, Out, Black (800132-002) Zebra 2300 Wax Ribbon 56.9 mm × 74 m800132-00256.9 mm 74 m Wax Outside12.7 mm2,44 €+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300BK11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300BK11030110 mm 300 m Wax Outside25.4 mm8,30 €+VATIn stock
    Zebra 5095 Resin Ribbon 84 mm × 74 m, Out, Black (05095GS08407) Zebra 5095 Resin Ribbon 84 mm × 74 m05095GS0840784 mm 74 m Resin Outside12.7 mm6,69 €+VATIn stock
    Zebra 5095 Resin Ribbon 56.9 mm × 74 m, Out, Black (800132-202) Zebra 5095 Resin Ribbon 56.9 mm × 74 m800132-20256.9 mm 74 m Resin Outside12.7 mm4,65 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 64 mm × 74 m, Out, Black (03200GS06407) Zebra 3200 Wax/Resin Ribbon 64 mm × 74 m03200GS0640764 mm 74 m Wax/Resin Outside12.7 mm3,12 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (03200BK11030) Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m03200BK11030110 mm 300 m Wax/Resin Outside25.4 mm16,98 €+VATIn stock
    Zebra 2300 Wax Ribbon 33 mm × 74 m, Out, Black (02300GS03307) Zebra 2300 Wax Ribbon 33 mm × 74 m02300GS0330733 mm 74 m Wax Outside12.7 mm1,19 €+VATIn stock
    Zebra 2300 Wax Ribbon 60 mm × 300 m, Out, Black (02300BK06030) Zebra 2300 Wax Ribbon 60 mm × 300 m02300BK0603060 mm 300 m Wax Outside25.4 mm4,52 €+VATIn stock
    Zebra 2300 Wax Ribbon 83 mm × 300 m, Out, Black (02300BK08330) Zebra 2300 Wax Ribbon 83 mm × 300 m02300BK0833083 mm 300 m Wax Outside25.4 mm6,26 €+VATIn stock
    Zebra 5095 Resin Ribbon 60 mm × 300 m, Out, Black (05095BK06030) Zebra 5095 Resin Ribbon 60 mm × 300 m05095BK0603060 mm 300 m Resin Outside25.4 mm18,87 €+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 300 m, Out, Black (05095BK11030) Zebra 5095 Resin Ribbon 110 mm × 300 m05095BK11030110 mm 300 m Resin Outside25.4 mm34,59 €+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300GT11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300GT11030110 mm 300 m Wax Outside25.4 mm8,72 €+VATIn stock
    Zebra 3300 Wax/Resin Ribbon 84 mm × 74 m, Out, Black (03300GS08407) Zebra 3300 Wax/Resin Ribbon 84 mm × 74 m03300GS0840784 mm 74 m Wax/Resin Outside12.7 mm2,80 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m, Out, Black (03200BK06030) Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m03200BK0603060 mm 300 m Wax/Resin Outside25.4 mm9,24 €+VATIn stock
    Zebra 5095 Resin Ribbon 83 mm × 300 m, Out, Black (05095BK08330) Zebra 5095 Resin Ribbon 83 mm × 300 m05095BK0833083 mm 300 m Resin Outside25.4 mm26,10 €+VATIn stock
    Zebra 3300 Wax/Resin Ribbon 110 mm × 74 m, Out, Black (03300GS11007) Zebra 3300 Wax/Resin Ribbon 110 mm × 74 m03300GS11007110 mm 74 m Wax/Resin Outside12.7 mm3,65 €+VATIn stock
    Zebra 5095 Resin Ribbon 33 mm × 74 m, Out, Black (800132-201) Zebra 5095 Resin Ribbon 33 mm × 74 m800132-20133 mm 74 m Resin Outside12.7 mm2,70 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m, Out, Black (03200BK08330) Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m03200BK0833083 mm 300 m Wax/Resin Outside25.4 mm12,81 €+VATIn stock
    Zebra 5095 Resin Ribbon 56.9 mm × 74 m, Out, Black (05095ZD25707) Zebra 5095 Resin Ribbon 56.9 mm × 74 m05095ZD2570756.9 mm 74 m Resin Outside12.7 mm4,65 €+VATIn stock
    Zebra 2300 Wax Ribbon 33 mm × 74 m, Out, Black (800132-001) Zebra 2300 Wax Ribbon 33 mm × 74 m800132-00133 mm 74 m Wax Outside12.7 mm1,41 €+VATIn stock
    Zebra 2300 Wax Ribbon 56.9 mm × 74 m, Out, Black (02300ZD25707) Zebra 2300 Wax Ribbon 56.9 mm × 74 m02300ZD2570756.9 mm 74 m Wax Outside12.7 mm2,44 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 84 mm × 74 m, Out, Black (03200GS08407) Zebra 3200 Wax/Resin Ribbon 84 mm × 74 m03200GS0840784 mm 74 m Wax/Resin Outside12.7 mm4,07 €+VATIn stock
    Zebra 3300 Wax/Resin Ribbon 64 mm × 74 m, Out, Black (03300GS06407) Zebra 3300 Wax/Resin Ribbon 64 mm × 74 m03300GS0640764 mm 74 m Wax/Resin Outside12.7 mm2,13 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 33 mm × 74 m, Out, Black (800132-101) Zebra 3200 Wax/Resin Ribbon 33 mm × 74 m800132-10133 mm 74 m Wax/Resin Outside12.7 mm1,78 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 60 mm × 300 m, Out, Black (74776) Zebra Image Lock Resin Ribbon 60 mm × 300 m7477660 mm 300 m Resin Outside25.4 mm105,63 €+VATOut of stock View
    Zebra 5319 Wax Ribbon 110 mm × 300 m, Out, Gold (05319GD11030) Zebra 5319 Wax Ribbon 110 mm × 300 m05319GD11030110 mm 300 m Wax Outside25.4 mm74,66 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 110 mm × 300 m, Out, Black (74917) Zebra Image Lock Resin Ribbon 110 mm × 300 m74917110 mm 300 m Resin Outside25.4 mm193,66 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 64 mm × 74 m, Out, Black (74941) Zebra Image Lock Resin Ribbon 64 mm × 74 m7494164 mm 74 m Resin Outside12.7 mm33,00 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 80 mm × 300 m, Out, Black (74777) Zebra Image Lock Resin Ribbon 80 mm × 300 m7477780 mm 300 m Resin Outside25.4 mm140,85 €+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (03200GT11030) Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m03200GT11030110 mm 300 m Wax/Resin Outside25.4 mm17,84 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 84 mm × 74 m, Out, Black (74942) Zebra Image Lock Resin Ribbon 84 mm × 74 m7494284 mm 74 m Resin Outside12.7 mm43,30 €+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m, Out, Black (03200ZD25707) Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m03200ZD2570756.9 mm 74 m Wax/Resin Outside12.7 mm3,07 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 110 mm × 300 m, Out, Black (P159049-001) TSC 8050-SWX Wax Ribbon 110 mm × 300 mP159049-001110 mm 300 m Wax Outside25.4 mm4,69 €+VATIn stock
    Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 60 mm × 300 m, Out, Black (I90677-0) Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 60 mm × 300 mI90677-060 mm 300 m Wax/Resin Outside25.4 mm68,95 €+VATOut of stock View
    Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (1-970700-05-0) Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 110 mm × 300 m1-970700-05-0110 mm 300 m Wax/Resin Outside25.4 mm126,38 €+VATOut of stock View
    Honeywell TMX 3710 / HR03 Resin Ribbon 60 mm × 300 m, Out, Black (I90679-0) Honeywell TMX 3710 / HR03 Resin Ribbon 60 mm × 300 mI90679-060 mm 300 m Resin Outside25.4 mm155,74 €+VATOut of stock View
    Honeywell TMX 3710 / HR03 Resin Ribbon 110 mm × 300 m, Out, Black (1-970657-01-0) Honeywell TMX 3710 / HR03 Resin Ribbon 110 mm × 300 m1-970657-01-0110 mm 300 m Resin Outside25.4 mm285,53 €+VATOut of stock View
    TSC 8600-SRE Resin Ribbon 110 mm × 300 m, Out, Black (P159053-001) TSC 8600-SRE Resin Ribbon 110 mm × 300 mP159053-001110 mm 300 m Resin Outside25.4 mm24,09 €+VATOut of stock View
    TSC 8550-SWR Wax/Resin Ribbon 110 mm × 300 m, Out, Black (P159051-001) TSC 8550-SWR Wax/Resin Ribbon 110 mm × 300 mP159051-001110 mm 300 m Wax/Resin Outside25.4 mm12,29 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 60 mm × 300 m, Out, Black (P159031-001) TSC 8050-SWX Wax Ribbon 60 mm × 300 mP159031-00160 mm 300 m Wax Outside25.4 mm2,56 €+VATOut of stock View
    TSC 8300-PWX Wax Ribbon 60 mm × 300 m, Out, Black (P159032-001) TSC 8300-PWX Wax Ribbon 60 mm × 300 mP159032-00160 mm 300 m Wax Outside25.4 mm5,56 €+VATOut of stock View
    TSC 8550-SWR Wax/Resin Ribbon 60 mm × 300 m, Out, Black (P159033-001) TSC 8550-SWR Wax/Resin Ribbon 60 mm × 300 mP159033-00160 mm 300 m Wax/Resin Outside25.4 mm6,71 €+VATOut of stock View
    TSC 8580-PWR Wax/Resin Ribbon 60 mm × 300 m, Out, Black (P159034-001) TSC 8580-PWR Wax/Resin Ribbon 60 mm × 300 mP159034-00160 mm 300 m Wax/Resin Outside25.4 mm8,82 €+VATOut of stock View
    TSC 8600-SRE Resin Ribbon 60 mm × 300 m, Out, Black (P159035-001) TSC 8600-SRE Resin Ribbon 60 mm × 300 mP159035-00160 mm 300 m Resin Outside25.4 mm13,15 €+VATOut of stock View
    TSC 8770-PRE Resin Ribbon 60 mm × 300 m, Out, Black (P159036-001) TSC 8770-PRE Resin Ribbon 60 mm × 300 mP159036-00160 mm 300 m Resin Outside25.4 mm19,40 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 83 mm × 300 m, Out, Black (P159037-001) TSC 8050-SWX Wax Ribbon 83 mm × 300 mP159037-00183 mm 300 m Wax Outside25.4 mm3,54 €+VATOut of stock View
    TSC 8300-PWX Wax Ribbon 83 mm × 300 m, Out, Black (P159038-001) TSC 8300-PWX Wax Ribbon 83 mm × 300 mP159038-00183 mm 300 m Wax Outside25.4 mm7,69 €+VATOut of stock View
    TSC 8550-SWR Wax/Resin Ribbon 83 mm × 300 m, Out, Black (P159039-001) TSC 8550-SWR Wax/Resin Ribbon 83 mm × 300 mP159039-00183 mm 300 m Wax/Resin Outside25.4 mm9,27 €+VATOut of stock View
    TSC 8580-PWR Wax/Resin Ribbon 83 mm × 300 m, Out, Black (P159040-001) TSC 8580-PWR Wax/Resin Ribbon 83 mm × 300 mP159040-00183 mm 300 m Wax/Resin Outside25.4 mm12,21 €+VATOut of stock View
    TSC 8600-SRE Resin Ribbon 83 mm × 300 m, Out, Black (P159041-001) TSC 8600-SRE Resin Ribbon 83 mm × 300 mP159041-00183 mm 300 m Resin Outside25.4 mm18,19 €+VATOut of stock View
    TSC 8770-PRE Resin Ribbon 83 mm × 300 m, Out, Black (P159042-001) TSC 8770-PRE Resin Ribbon 83 mm × 300 mP159042-00183 mm 300 m Resin Outside25.4 mm26,84 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 90 mm × 300 m, Out, Black (P159043-001) TSC 8050-SWX Wax Ribbon 90 mm × 300 mP159043-00190 mm 300 m Wax Outside25.4 mm3,84 €+VATOut of stock View
    TSC 8300-PWX Wax Ribbon 90 mm × 300 m, Out, Black (P159044-001) TSC 8300-PWX Wax Ribbon 90 mm × 300 mP159044-00190 mm 300 m Wax Outside25.4 mm8,34 €+VATOut of stock View

    Compatible labels

    ProductSize (W × H) Material Labels / rollCorePrice
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 101.6 mm, H: 152.4 mm, D: 127 mm, C: 25.4 mm (800284-605) Zebra Z-Perform 1000D800284-605101.6 × 152.4 mm Thermal Paper 47525.4 mm19,50 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (800262-125) Zebra Z-Select 2000D800262-12557.15 × 31.75 mm Thermal Paper 210025.4 mm14,06 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 51x25mm, 2580 labels/roll, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (880199-025D) Zebra Z-Select 2000D880199-025D51 × 25 mm Thermal Paper 258025.4 mm14,06 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 63.5 mm, D: 127 mm, C: 25.4 mm (3007206-T) Zebra Z-Select 2000T3007206-T101.6 × 63.5 mm Normal Paper 110025.4 mm16,48 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (3007201-T) Zebra Z-Select 2000T3007201-T50.8 × 25.4 mm Normal Paper 258025.4 mm9,21 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 76x51mm, 1370 labels/roll, perforated, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (800263-205) Zebra Z-Select 2000D800263-20576 × 51 mm Thermal Paper 137025.4 mm17,84 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3006318) Zebra Z-Select 2000T300631857.15 × 31.75 mm Normal Paper 210025.4 mm10,74 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (800274-205) Zebra Z-Select 2000T800274-205101.6 × 50.8 mm Normal Paper 137025.4 mm16,48 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 101.6 mm, H: 101.6 mm, D: 127 mm, C: 25.4 mm (800264-405) Zebra Z-Select 2000D800264-405101.6 × 101.6 mm Thermal Paper 70025.4 mm23,38 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3007205-T) Zebra Z-Select 2000T3007205-T69.85 × 31.75 mm Normal Paper 210025.4 mm12,47 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 38.1 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880595-025DU) Zebra Z-Perform 1000D880595-025DU38.1 × 25.4 mm Thermal Paper 258025.4 mm11,76 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 69.85 mm, H: 38.1 mm, D: 127 mm, C: 25.4 mm (880013-038D) Zebra Z-Perform 1000T880013-038D69.85 × 38.1 mm Normal Paper 179025.4 mm11,14 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 38.1 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880003-025D) Zebra Z-Perform 1000T880003-025D38.1 × 25.4 mm Normal Paper 258025.4 mm7,99 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 76.2 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (800273-205) Zebra Z-Select 2000T800273-20576.2 × 50.8 mm Normal Paper 137025.4 mm12,57 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 31.75 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800261-105) Zebra Z-Select 2000D800261-10531.75 × 25.4 mm Thermal Paper 258025.4 mm9,27 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 31 mm, H: 22 mm, D: 127 mm, C: 25.4 mm (3007200-T) Zebra Z-Select 2000T3007200-T31 × 22 mm Normal Paper 289025.4 mm7,07 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 76.2 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (880255-050D) Zebra Z-Ultimate 3000T880255-050D76.2 × 50.8 mm Synthetic 137025.4 mm61,73 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880007-025D) Zebra Z-Perform 1000T880007-025D50.8 × 25.4 mm Normal Paper 258025.4 mm8,54 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (3007202-T) Zebra Z-Select 2000T3007202-T57.15 × 50.8 mm Normal Paper 137025.4 mm10,00 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 101.6 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (880261-050D) Zebra Z-Ultimate 3000T880261-050D101.6 × 50.8 mm Synthetic 137025.4 mm69,36 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 31.75 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800271-105) Zebra Z-Select 2000T800271-10531.75 × 25.4 mm Normal Paper 258025.4 mm7,07 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T White, W: 38.1 mm, H: 12.7 mm, D: 127 mm, C: 25.4 mm (880243-012D) Zebra Z-Ultimate 3000T White880243-012D38.1 × 12.7 mm Synthetic 465025.4 mm36,06 €+VATIn stock
    Labels, Zebra, Synthetic, PolyPro 3000T Gloss, W: 101.6 mm, H: 152.4 mm, D: 127 mm, C: 25.4 mm (3012964) Zebra PolyPro 3000T Gloss3012964101.6 × 152.4 mm Synthetic 53325.4 mm37,37 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880247-025D) Zebra Z-Ultimate 3000T880247-025D50.8 × 25.4 mm Synthetic 258025.4 mm44,37 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T Silver, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880269-025D) Zebra Z-Ultimate 3000T Silver880269-025D50.8 × 25.4 mm Synthetic 258025.4 mm46,55 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880181-031D) Zebra Z-Perform 1000D880181-031D69.85 × 31.75 mm Thermal Paper 210025.4 mm15,13 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 76.2 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800273-105) Zebra Z-Select 2000T800273-10576.2 × 25.4 mm Normal Paper 258025.4 mm13,09 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T Silver, W: 38.1 mm, H: 19.05 mm, D: 127 mm, C: 25.4 mm (3006493) Zebra Z-Ultimate 3000T Silver300649338.1 × 19.05 mm Synthetic 372025.4 mm39,06 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880253-031D) Zebra Z-Ultimate 3000T880253-031D69.85 × 31.75 mm Synthetic 210025.4 mm53,75 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880249-031D) Zebra Z-Ultimate 3000T880249-031D57.15 × 31.75 mm Synthetic 210025.4 mm47,74 €+VATIn stock
    Labels, Zebra, Synthetic, 8100T CryoCool, W: 30 mm, H: 15 mm, D: 127 mm, C: 25.4 mm (3017014) Zebra 8100T CryoCool301701430 × 15 mm Synthetic 443025.4 mm75,35 €+VATIn stock
    Labels, Zebra, Synthetic, 8100T CryoCool, W: 51 mm, H: 25 mm, D: 127 mm, C: 25.4 mm (3017015) Zebra 8100T CryoCool301701551 × 25 mm Synthetic 270025.4 mm93,25 €+VATIn stock
    Foil labels 70x40 / 1000 pcs, 40 g, polypropylene acrylic glue 1 row external roll white color rounded corners Foil labels 70x40 / 1000 pcsKK01032770 × 40 mm Synthetic (PP) 100040 mm8,36 €+VATIn stock
    Foil synthetic 50x30 / 1000 pcs, 40 g, polypropylene,1 row, an external coil, adhesive, white gloss Foil synthetic 50x30 / 1000 pcsKK01031650 × 30 mm Synthetic (PP) 100040 mm6,96 €+VATIn stock
    Foil synthetic 43x30 / 1000 pcs, 40 g, polypropylene,1 row, an external coil, white glos Foil synthetic 43x30 / 1000 pcsKK01844743 × 30 mm Synthetic (PP) 100040 mm5,10 €+VATIn stock
    Foil synthetic 50x30 / 1000 pcs, 40 g, polypropylene,1 row, an external coil, acrilic adhesive, white gloss Foil synthetic 50x30 / 1000 pcsKK00028950 × 30 mm Synthetic (PP) 100040 mm6,96 €+VATIn stock
    Foil labels 80x90 / 800 pcs, 40 g, polypropylene, without glue, an external coil, white Foil labels 80x90 / 800 pcsKK00153980 × 90 mm Synthetic (PP) 80040 mm39,48 €+VATIn stock
    Foil labels 40x20 / 1000 pcs, 40 g, polyester,acrylic glue, an external coil, white matte, corners rounded Foil labels 40x20 / 1000 pcsKK00102040 × 20 mm Synthetic (PET) 100040 mm12,08 €+VATIn stock
    Paper direct thermal labels 100x170 / 250 pcs, 40 g, matte, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 100x170 / 250 pcsKK010247100 × 170 mm Thermal Paper 25040 mm8,36 €+VATIn stock
    Thermal labels 32x20 / 2000 pcs, 25 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners, plastic core Thermal labels 32x20 / 2000 pcsKK00117632 × 20 mm Thermal Paper 200025 mm3,72 €+VATIn stock
    32x20 / 2000 pcs, 40 g, 32x20 / 2000 pcsKK00016532 × 20 mm 200040 mm3,26 €+VATIn stock
    Paper direct thermal labels 40x40 / 1000 pcs, 40 g, semi-glossy, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 40x40 / 1000 pcsKK00019340 × 40 mm Thermal Paper 100040 mm3,26 €+VATIn stock
    Thermal labels 50x30 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 50x30 / 1000 pcsKK00053850 × 30 mm Thermal Paper 100040 mm3,72 €+VATIn stock
    Paper thermal transfer labels 50x40 / 1500 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 50x40 / 1500 pcsKK00014250 × 40 mm Normal Paper 150040 mm5,58 €+VATIn stock
    58x43 / 1000 pcs, 40 g, 58x43 / 1000 pcsKK00010358 × 43 mm 100040 mm4,18 €+VATIn stock
    60x40 / 1000 pcs, 40 g, 60x40 / 1000 pcsKK00126960 × 40 mm 100040 mm4,18 €+VATIn stock
    Thermal transfer labels 66x66 / 600 pcs, 40 g, semi-gloss acrylic adhesive 1 row an external coil color white rounded corners Thermal transfer labels 66x66 / 600 pcsEPKBA-0660/0660-206066 × 66 mm Normal Paper 60040 mm5,58 €+VATIn stock
    Thermal labels 70x60 / 1000 pcs, 25 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 70x60 / 1000 pcsKK00138770 × 60 mm Thermal Paper 100025 mm7,44 €+VATIn stock
    Paper thermal transfer labels 80x20 / 2000 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 80x20 / 2000 pcsKK00012580 × 20 mm Normal Paper 200040 mm6,96 €+VATIn stock
    Paper thermal transfer labels 100x40 / 1000 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 100x40 / 1000 pcsKK000272100 × 40 mm Normal Paper 100040 mm6,96 €+VATIn stock
    Paper direct thermal labels 100x50 / 1000 pcs, 40 g, semi-glossy, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 100x50 / 1000 pcsKK000203100 × 50 mm Thermal Paper 100040 mm7,44 €+VATIn stock
    Thermal labels 80x50 / 1000 pcs, 40 g, semi-gloss rubber adhesive 1 row outer beam white color rounded corners Thermal labels 80x50 / 1000 pcsKK00017980 × 50 mm Thermal Paper 100040 mm7,90 €+VATIn stock
    Thermal labels 80x50 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer coil color YELLOW rounded corners Thermal labels 80x50 / 1000 pcsKK00144280 × 50 mm Thermal Paper 100040 mm5,58 €+VATIn stock
    Paper thermal transfer labels 50x25 / 2000 pcs, 40 g, matte, acrilic adhesive, 1 row, an external coil, white, corners rounded Paper thermal transfer labels 50x25 / 2000 pcsKK00029750 × 25 mm Normal Paper 200040 mm5,58 €+VATIn stock
    Paper thermal transfer labels 100x60 / 500 pcs, 40 g, matte, acrilic adhesive, 1 row, an external coil, white, corners rounded Paper thermal transfer labels 100x60 / 500 pcsKK000060100 × 60 mm Normal Paper 50040 mm6,04 €+VATIn stock
    Paper thermal labels 100x70 / 800 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 100x70 / 800 pcsKK01715100 × 70 mm Thermal Paper (Eco) 80040 mm10,44 €+VATIn stock
    Paper thermal transfer labels 100x100 / 500 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 100x100 / 500 pcsKK000202100 × 100 mm Normal Paper 50040 mm8,36 €+VATIn stock
    Thermal labels 100x150 / 500 pcs, 40 g, matt acrylic glue, outer beam, white color, rounded corners Thermal labels 100x150 / 500 pcsKK000121100 × 150 mm Thermal Paper 50040 mm11,60 €+VATIn stock
    Thermal labels 40x25 / 2000 pcs, 40 g, semi-gloss release adhesive 1 row outer coil rounded corners Thermal labels 40x25 / 2000 pcsKK00048840 × 25 mm Thermal Paper 200040 mm9,28 €+VATIn stock
    Thermal labels 30x10 / 2000 pcs, 40 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 30x10 / 2000 pcsKK00014830 × 10 mm Thermal Paper (Eco) 200040 mm4,18 €+VATIn stock
    Thermal labels 32x20 / 180 pcs, 25 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 32x20 / 180 pcsKK00079832 × 20 mm Thermal Paper (Eco) 18025 mm0,70 €+VATIn stock
    Paper thermal labels 32x20 / 2500 pcs, 25 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal labels 32x20 / 2500 pcsKK00117732 × 20 mm Thermal Paper (Eco) 250025 mm6,04 €+VATIn stock
    Paper thermal labels 32x20 / 2000 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 32x20 / 2000 pcsKK00014732 × 20 mm Thermal Paper (Eco) 200040 mm3,72 €+VATIn stock
    Paper thermal labels 32x25 / 2000 pcs, 25 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 32x25 / 2000 pcsKK01022732 × 25 mm Thermal Paper (Eco) 200025 mm2,88 €+VATIn stock
    Paper thermal labels 40x30 / 1000 pcs, 40 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal labels 40x30 / 1000 pcsKK00146540 × 30 mm Thermal Paper (Eco) 100040 mm3,26 €+VATIn stock
    Thermal labels 50x25 / 1000 pcs, 40 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 50x25 / 1000 pcsKK00077050 × 25 mm Thermal Paper (Eco) 100040 mm4,64 €+VATIn stock
    Paper thermal transfer labels 50x35 / 1000 pcs, 40 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal transfer labels 50x35 / 1000 pcsKK00137450 × 35 mm Normal Paper 100040 mm5,10 €+VATIn stock
    Paper thermal labels 55x80 / 500 pcs, 40 g, top, adhesive, an external coil, 1 row, white, rounded corners Paper thermal labels 55x80 / 500 pcsKK01595055 × 80 mm Thermal Paper (Top) 50040 mm5,86 €+VATIn stock
    Thermal labels 60x30 / 1000 pcs, 40 g, eco acrylic glue 1 row outer coil rounded corners white Thermal labels 60x30 / 1000 pcsETEBA-0600/0300-210060 × 30 mm Thermal Paper (Eco) 100040 mm4,42 €+VATIn stock
    Paper thermal labels 75x25 / 1000 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 75x25 / 1000 pcsKK00063575 × 25 mm Thermal Paper (Eco) 100040 mm4,64 €+VATIn stock
    Paper thermal labels 80x20 / 2000 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 80x20 / 2000 pcsKK00020980 × 20 mm Thermal Paper (Eco) 200040 mm9,28 €+VATIn stock
    Paper thermal labels 80x50 / 1000 pcs, 40 g, eco,acrilic adhesive, an external coil, 1 row, white, rounded corners Paper thermal labels 80x50 / 1000 pcsKK00020580 × 50 mm Thermal Paper (Eco) 100040 mm6,96 €+VATIn stock
    Paper thermal labels 100x60 / 500 pcs, 40 g, eco acrilic adhesive, an external coil, 1 row, white, corners rounded Paper thermal labels 100x60 / 500 pcsKK000115100 × 60 mm Thermal Paper (Eco) 50040 mm6,04 €+VATIn stock
    Thermal labels 100x100 / 500 pcs, 40 g, eco, acrylic adhesive, 1 row, outer coil, white, rounded corners Thermal labels 100x100 / 500 pcsKK000408100 × 100 mm Thermal Paper (Eco) 50040 mm8,36 €+VATIn stock
    Thermal labels 100x140 / 500 pcs, 40 g, eco, acrylic adhesive, 1 row, outer coil, white, rounded corners Thermal labels 100x140 / 500 pcsKK001310100 × 140 mm Thermal Paper (Eco) 50040 mm9,76 €+VATIn stock
    Label 100mm x 150mm White Direct Thermal Labels (360 pcs) Label 100mm x 150mm White Direct Thermal Labels (360 pcs)KK01673100 × 150 mm Thermal Paper 360—9,28 €+VATIn stock
    Paper direct thermal labels 102x40 / 930 pcs, 40 g, matte, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 102x40 / 930 pcsKK001687102 × 40 mm Thermal Paper 93040 mm6,04 €+VATIn stock
    Thermal labels 60x40 / 1000 pcs, 40 g, eco acrylic release adhesive 1 row outer coil color white rounded corners Thermal labels 60x40 / 1000 pcsKK01039560 × 40 mm Thermal Paper (Eco) 100040 mm6,50 €+VATIn stock
    Direct thermal labels 80x60 / 1000 pcs, core 40 removeable glue, 1 row, an external coil Direct thermal labels 80x60 / 1000 pcsKK00142880 × 60 mm Thermal Paper 100040 mm16,26 €+VATIn stock
    Paper thermal transfer labels 60x30 / 1000 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 60x30 / 1000 pcsKK00003660 × 30 mm Normal Paper 100040 mm3,72 €+VATIn stock

    More Zebra ZD421 guides

    ZD421 ComparisonZebra ZD621 vs ZD421: which 4-inch desktop printer?5 min · Easy ZD411 ComparisonZebra ZD421 vs ZD411: 4-inch or 2-inch desktop printer?5 min · Easy ZD421 TroubleshootingZebra ZD421 lights and errors: what they mean and how to fix them10 min · Easy ZD421 How-toReset a Zebra ZD421 to factory defaults10 min · Easy ZD421 How-toCalibrate the Zebra ZD421: SmartCal and manual calibration10 min · Easy ZD220 How-toPrint 100×150 mm shipping labels on Zebra ZD220, ZD230 and ZD42110 min · Easy
    Still stuck?

    Send us your model and a short description of the problem. Our team will help you find a solution.

    Contact support
    Zebra ZD421t Desktop Label Printer (ZD4A042-30EE00EZ)408,25 €+VAT View product